The electric geyser is a vital appliance for each Indian home, especially during the winter season, when hot water becomes a vital requirement for performing daily tasks like washing clothes and taking a bath. Therefore, you would definitely not want your hot water heater to malfunction suddenly.<\/p>\n
Isn\u2019t it a frustrating experience? As in the case of all other appliances, geysers too develop problems due to wear and tear, lack of maintenance, or improper usage. Here are some of the major problems that crop up in geysers and how they can be resolved:<\/p>\n
Water is taking too long to heat<\/b><\/p>\n
When your geyser appears to work at a slower pace than usual, it becomes inefficient. The problem might be due to the mineral deposits on the heating elements, low power supply, or an old geyser.<\/p>\n
It is essential that you clean your heating element daily to check the power supply voltage due to the unstable power supply, which may minimize the heating process. If the geyser is more than seven years old, replace it with an efficient electric water heater.<\/p>\n
The geyser is producing discolored, rusty water<\/b><\/p>\n
This is an emergency signal that cannot be ignored. Usually, the issue is caused by wiring faults, heating of wires, or melting of insulation because of excessive usage without maintenance.<\/p>\n
Switch off the water and electricity immediately. Don\u2019t try to restart the system. Let a geyser mechanic in Noida <\/b>analyze the inner wiring and get the parts replaced. This can be prevented by making sure that the surroundings of the geyser remain dry and there are no loose connections near the sockets and switches.<\/p>\n
Low water pressure from the geyser<\/b><\/p>\n
Cut off both electricity and water connections and take out the outlet filters. In certain cases, the plumber might have to flush the inside pipes. Regular servicing of the geyser will ensure that there is no water or sediment accumulation.<\/p>\n
Strange noises<\/b><\/p>\n
Strange sounds such as squeals, rumbles, or humming might be heard from the geyser, and this is an indication that you are likely dealing with mineral deposits in the tank. This problem is quite common with old geysers. Minerals from hard water keep accumulating in the tank and on the heating element and get hardened over time, which ultimately causes leaks.<\/p>\n
Drain the water tank, and clean the element within the tank on your own. However, if you don\u2019t have prior experience, opt for professional help. In some cases, these strange noises might be caused by air trapped within pipes. To solve this issue, run hot water through the pipes while keeping one end open to release the trapped air.<\/p>\n
The geyser has a burning smell or smoke<\/b><\/p>\n
This problem arises because of short-circuit wiring or overheating and melting of insulation wires because of excessive use without proper maintenance. Stop the power and water supply immediately. Don\u2019t try to start the machine immediately.<\/p>\n
Let the geyser technician in Noida <\/b>you hire inspect the inside wiring and get the broken components repaired. You can avoid this by keeping the surroundings of the geyser dry and having no loose wiring near the vicinity.<\/p>\n
There is a leakage in the geyser.<\/b><\/p>\n
The most frequent problem that occurs is the failure to get heated water, though the lamp is functioning well. This could be due to reasons such as a burned-out heating element, a faulty thermostat, or a broken water heater coil. The sediment might form insulation, preventing proper water heating.<\/p>\n
One should check whether the temperature is properly set and adjust if needed. In case it doesn\u2019t help, replace the thermostat. Make sure that the task is handled by a professional who offers geyser repair services in Noida<\/b><\/a>. Regular descaling helps to prevent this from recurring.<\/p>\n The most common problem that users encounter is when the water stays cold though the indicator light is functioning. In such situations, the problem could be due to a burnt-out heating element, an improperly functioning heater coil, or a thermostat. Sediment build-up can be an insulator between the heating element and water. You will have to start adjusting the settings of your thermostat. In case that doesn\u2019t work out, the thermostat should be replaced.<\/p>\n There is water leakage from the pressure release valve<\/b><\/p>\n The safety valve is meant to discharge water when the internal pressure rises disproportionately. This device serves the purpose of releasing water when the initial pressure becomes too much. But if the pressure valve drips continuously, it is an indication that there is a problem with the function of the device.<\/p>\n There are many visible causes of the problem. However, the most probable cause of the excess of water pressure is either the main supply or a defect in the valve spring. It is necessary to check the level of pressure in the main line.<\/p>\n Smelly water<\/b><\/p>\n Have you ever encountered water coming out of your geyser? If it is so, your geyser has bacteria buildup within the tank, or it has been affected by rust or corrosion. In case the water smells like sulfur or rotten egg, then bacteria buildup is the problem. To resolve this, you will have to flush the tank properly, and you can use a hydrogen peroxide solution for disinfecting the tank.<\/p>\n